VUE FWD L4-2.4L Hybrid (2007)
![background image](/saturn/vue_fwd/l4-2.4l_hybrid/Page-2376001.png)
Trim Panel: Service and Repair
Center Pillar Upper Garnish Molding Replacement
Center Pillar Upper Garnish Molding Replacement
Removal Procedure
1. Unsnap the height adjuster cover.
2. Remove the D-ring bolt.
3. Remove the shoulder belt from the center pillar.
4. Remove the fastener cover from the center pillar garnish molding by inserting a small flat-bladed tool in the gap at the forward vertical side of the
cover.
5. Remove the center pin of the garnish molding fastener by using needle-nose pliers.
6. Starting at the top, gently pull on the garnish molding to disengage the attaching clips.