VUE FWD L4-2.4L Hybrid (2007)
1. Peel off the self-stick tape from the back side of the heater element.
2. Position the heater element over the seat foam pad. Press firmly to engage the adhesive.
3. Lower the seat back trim cover, pressing on the hook and loop retainers in order to engage the retainers.
4. Connect the lower J-hook retainer to the seat back trim.
5. Connect the electrical connector to the heater element module.
6. Install the armrest to the seat.
7. Install the outer trim panel to the seat cushion.
8. Install the front seat.