saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Control Assembly, HVAC > < Condenser HVAC|Service and Repair|Page 13939
Page 4
background image

8. Install a new seal washer to the receiver dehydrator.
9. Install the receiver dehydrator to the condenser.

10. Install the receiver dehydrator nut to the condenser.

Tighten the nut to 16 N.m (12 lb ft).

11. Install the CRFM closeout panel.

12. For L61 vehicles, install the battery box air duct.
13. Install the front fascia.
14. Evacuate and charge the A/C system. Refer to Refrigerant Recovery and Recharging.
15. Use J 39400-A to test the affected A/C joints leaks.

Control Assembly, HVAC > < Condenser HVAC|Service and Repair|Page 13939