VUE FWD L4-2.4L Hybrid (2007)
10. Install the 36-volt positive battery cable bracket to the front of dash studs.
11. Install the 36-volt positive battery cable bracket nuts (5) to the front of dash studs.
Tighten the nuts to 10 N.m (89 lb in).
12. Install the 36-volt positive battery cable retainer (2) to the shock tower bracket.
13. Install a NEW terminal block seal to the generator control module.
14. Position and install the 36-volt terminal block to the generator control module.
15. Install the 36-volt terminal block nuts to the generator control module.
Tighten the nuts to 10 N.m (89 lb in).
16. Install the 36-volt positive battery cable nut to the generator control module.
Tighten the nuts to 10 N.m (89 lb in).
