VUE FWD L4-2.4L Hybrid (2007)
Hybrid Battery Fuse: Service and Repair
Battery Positive Cable Fuse Replacement
Removal Procedure
1. Disconnect the hybrid battery.
2. Remove the engine wiring harness auxiliary bussed electrical center (BEC) (1) from the wiring harness relay block bracket.
3. Remove the engine wiring harness clip (2) from the positive battery cable bracket.
4. Reposition the engine wiring harness auxiliary BEC (1) out of the way.
5. Remove the underhood bussed electrical center (UBEC) cover (1).
6. Loosen the UBEC bolts (2), once loose, tap the bolts once, in order to disengage the bolt from the electrical connectors.
7. Disengage the UBEC retaining tabs on the 4 corners and remove the UBEC.