VUE FWD L4-2.4L Hybrid (2007)
Evaporative Canister Filter: Service and Repair
Evaporative Emission Canister Filter Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Clean away any debris that may be present around the evaporative emission (EVAP) canister vent filter cover.
3. Carefully release the canister filter cover rear retaining tabs.
4. Carefully release the canister filter cover forward retaining tabs and remove the cover from the EVAP canister.
5. Remove the filter from the canister and discard the filter.
6. Remove the seal from the filter cover and discard the seal.
7. Clean the inside of the EVAP canister filter housing with a clean shop towel.
Installation Procedure