VUE FWD L4-2.4L Hybrid (2007)
10. Connect the fuel injector wiring harness electrical connector (7) to the engine wiring harness electrical connector (8).
11. Install the fuel injector wiring harness electrical connector clip (6) to the starter generator tab.
12. Connect the engine wiring harness electrical connector (1) to the TAC.
13. Connect the fuel feed line (1) quick connect fitting to the fuel rail.
14. Install the air cleaner outlet duct.
15. Connect the negative battery cable.
16. Inspect for fuel leaks using the following procedure:
1. Turn ON the ignition, with the engine OFF for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition.
4. Inspect for fuel leaks.
