VUE FWD L4-2.4L Hybrid (2007)
Control Arm Bushing: Service and Repair
Front Suspension
Front Lower Control Arm Bushing Replacement (Rear)
Front Lower Control Arm Bushing Replacement (Rear)
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the front tire and wheel assembly.
3. Remove the lower control arm.
4. Remove the rear bushing nut.
5. Remove the rear bushing.
Installation Procedure
Notice: Refer to Fastener Notice.
1. Install the rear bushing to the lower control arm.
Tighten the nut to 150 N.m (110 lb ft).
2. Install the lower control arm.
3. Install the front tire and wheel assembly.
4. Lower the vehicle.