VUE FWD L4-2.4L Hybrid (2007)
4. Verify the strut assembly is parallel with the J 45400.
2. Compress the spring enough to unload the upper strut mount.
Notice: Do not allow the absorber rod to rotate during disassembly/reassembly. Use hand tools to keep the absorber rod from rotating. If air tools
are used, and the rod is allowed to rotate, damage to the absorber may occur.
3. Use the J 42991 or equivalent hand tools to remove the strut shaft nut.
Important: Leave the spring in the spring compressor.
4. Lower the strut from the spring assembly.
