saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Case, A/T|Service and Repair|Page 10479 > < Case, A/T|Service and Repair
Page 2
background image

16. Remove the left wheel drive shaft from the transmission.
17. Remove the power steering gear intermediate shaft pinch bolt.
18. Remove the front transmission mount.

19. Remove the rear transmission mount to frame bolts.
20. Remove the frame bolts and lower the frame allowing the frame to hang from the right side suspension components. 
21. Lower the vehicle.
22. Remove the left transmission mount.
23. Lower the engine and transmission with the engine support fixture until the transmission side cover will clear the inner fender.
24. Raise the vehicle.

25. Remove the transmission side cover bolts (3) and studs (4).
26. Separate the case side cover (1) from the transmission case at the dowel pin locations (45) to prevent damage to the sealing surfaces.
27. Remove the transmission side cover (1).
28. Remove the two side cover gaskets (5 and 6) if they do not remain with the side cover.
29. Remove the thrust washer (7) if it does not remain with the side cover.

Case, A/T|Service and Repair|Page 10479 > < Case, A/T|Service and Repair