VUE FWD L4-2.4L Hybrid (2007)
31. Install the shift cable bracket (2), bolt (3), and nut (1).
Tighten the bolt (3) and nut (1) to 22 N.m (16 lb ft).
32. Install the shift control cable to the shift control cable bracket (1). Ensure the cable retaining clip (2) is fully seated.
33. Connect the shift control cable (3) to the range select lever (4).
34. Connect the air duct hose to the intake plenum.
35. Install the battery tray.
36. Fill the transmission.
Notice: Transmission Auxiliary Pump Priming must be performed after any service procedure is performed on the transmission that involves the
draining of and refill of transmission fluid. Failure to perform the Transmission Auxiliary Pump Priming will result in damage to the auxiliary
pump and possible damage to the transmission.
37. Using a scan tool, prime the transmission auxiliary pump.
