VUE FWD L4-2.4L Hybrid (2007)
Transmission Position Switch/Sensor: Service and Repair
5AT - Automatic Transmission
Park/Neutral Position Switch Replacement
Tools Required
J 36346 Fascia Retainer Remover
Removal Procedure
1. Apply the parking brake.
2. Place the transmission shift lever in the neutral position.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the tire and wheel.
5. Remove the left splash shield.
6. Remove the range selective lever bolt and cover.
7. Using the J 36346, disconnect the control cable from the transaxle range switch lever.
8. Disconnect the Park/neutral position switch harness connector.
9. Remove the transmission control nut (4) and lever (1).
10. Using a small screwdriver, bend the lock washer tabs down on the manual shaft nut.