VUE FWD L4-2.4L Hybrid (2007)
1. Install the transaxle control bracket.
Notice: Refer to Fastener Notice.
2. Install the transaxle control bracket bolts.
Tighten the transaxle control bracket bolts to 25 N.m (18 lb ft).
3. Install the control assembly.
Automatic Transmission Control Replacement
Automatic Transmission Control Replacement
Removal Procedure
1. If the shift control is being replaced, remove the shift control knob. If the shift lever is not being replaced, it is not necessary to remove the shift
control knob.
2. Remove the console shift lever bezel.
3. Remove the instrument panel storage compartment.
4. Remove the range select lever cable from the shift control.