VUE FWD L4-2.4L Hybrid (2007)
Notice: Refer to Fastener Notice.
2. Install the transmission mount-to-frame bolts.
Tighten the bolt to 50 N.m (37 lb ft).
3. Install the transmission mount-to-bracket through bolt, while aligning the transmission mount to the bracket.
Tighten the bolt to 110 N.m (81 lb ft).
4. If equipped with AWD, lower the stabilizer shaft and connect the stabilizer links.
Tighten the stabilizer link nuts to 65 N.m (48 lb ft).
5. Install both front tires and wheels.
6. Lower the vehicle.
Transmission Rear Mount Bracket Replacement
Transmission Rear Mount Bracket Replacement
Removal Procedure
