VUE FWD L4-2.4L Hybrid (2007)
Important: Install all possible shifter bolts with the shifter in NEUTRAL. Install the last shifter bolt with the shifter in gear, then shift
back into NEUTRAL.
2. Install the shifter.
Notice: Refer to Fastener Notice.
3. Install the shifter retaining bolts.
Tighten the bolts to 25 N.m (18 lb ft).
4. Ensure the transaxle is in NEUTRAL.
5. Apply P/N 21485278 to the shifter guide bolt.
Notice: Hand start and tighten the shifter guide bolt to avoid damaging the shift lever.
6. Install the shifter guide bolt.
Tighten the bolt to 25 N.m (18 lb ft).
7. Install the left inner splash shield.
8. Install the wheel.