VUE FWD L4-2.4L Hybrid (2007)
Windshield Washer Reservoir: Service and Repair
Washer Pump/Reservoir Replacement
Removal Procedure
Important: Allow the coolant surge tank sufficient cooling time before handling.
1. Remove the coolant surge tank bolts.
Important: Do not disconnect the coolant hoses from the coolant surge tank.
2. Disconnect the surge tank level sensor and set surge tank aside in engine compartment.
3. Remove the front washer solvent container bolts.
4. Disconnect the front washer solvent container hose from the front washer nozzle hose that runs along the upper motor compartment rail.
5. Angle the washer solvent container to the rear of the vehicle and pull out of the mounting hole.
6. Disconnect the washer pump electrical connector.
