VUE FWD V6-3.5L (2008)
Brake Fluid Level Sensor/Switch: Service and Repair
Brake Fluid Level Indicator Switch Replacement
Removal Procedure
1. Remove the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Replacement (See: Maintenance/Fuses and
Circuit Breakers/Fuse Block/Service and Repair/Underhood Electrical Center or Junction Block Replacement) .
2. Disconnect the brake fluid level sensor electrical connector.
3. While simultaneously depressing the retaining tabs on the opposite side of the sensor electrical connection, carefully pull the sensor from the
master cylinder reservoir.
4. Remove the low brake fluid level sensor.
Installation Procedure