VUE FWD V6-3.5L (2008)
3. Install the 4 vacuum brake booster nuts (1).
Tighten the nuts to 25 N.m (18 lb ft).
4. Connect the vacuum brake booster pushrod to the brake pedal.
5. Install the vacuum brake booster pushrod retainer (1).
Rotate the vacuum brake booster pushrod retainer 360 degrees to ensure it is properly installed.
6. Install the driver knee bolster. Refer to Driver Knee Bolster Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair) .
7. Install the BPMV. Refer to Brake Pressure Modulator Valve Replacement (See: Antilock Brakes / Traction Control Systems/Hydraulic Control
Assembly - Antilock Brakes/Service and Repair/Brake Pressure Modulator Valve Replacement) .
8. Install the master cylinder. Refer to Master Cylinder Replacement (See: Hydraulic System/Brake Master Cylinder/Service and Repair/Removal
and Replacement/Master Cylinder Replacement) .