VUE FWD V6-3.5L (2008)
Camshaft: Service and Repair
Camshaft Rear Bearing Hole Plug Replacement
Removal Procedure
1. Remove the engine flywheel. Refer to Engine Flywheel Replacement (See: Transmission and Drivetrain/Flex Plate/Service and Repair) .
2. Remove the camshaft rear bearing hole plug.
Installation Procedure
1. Coat the camshaft rear bearing hole plug with sealer. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Adhesives, Fluids,
Lubricants, and Sealers) .
2. Install the camshaft rear bearing hole plug.
3. Ensure that the camshaft rear bearing plug is installed to specifications.
4. Install the engine flywheel. Refer to Engine Flywheel Replacement (See: Transmission and Drivetrain/Flex Plate/Service and Repair) .