VUE FWD V6-3.5L (2008)
7. Install the front heater outlet hose to the outlet heater pipe.
8. Position the hose/pipe assembly. Install the clips to the throttle body studs.
9. Install the heater inlet and outer hoses/pipes to the engine inlet and outlet pipes.
10. Install the heater inlet and outlet hose/pipe clip nuts at the throttle body.
Tighten the nuts to 10 N.m (89 lb in).
11. Position the heater inlet and outlet hose/pipe clamps at the engine inlet and outer pipes.
12. Install the PCV foul air tube. Refer to Plastic Collar Quick Connect Fitting Service (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service) .