VUE FWD V6-3.5L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
1. Install the exhaust manifold heat shield (2).
2. Install the exhaust manifold heat shield bolts (1).
Tighten the bolts 22 N.m (16 lb ft).
3. Connect the engine harness electrical connector (3) to the HO2S electrical connector (2).
4. Install the CPA retainer.
5. Install the HO2S electrical connector rosebud clip to the engine wiring harness retaining strap (6).
6. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine/Intake Manifold/Service and Repair) .