VUE FWD V6-3.5L (2008)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor Replacement
Removal Procedure
1. Remove the power steering pump. Refer to Power Steering Pump Replacement (LZ4-3.5L) (See: Steering and Suspension/Steering/Power
Steering/Power Steering Pump/Service and Repair) .
2. Disconnect the camshaft position (CMP) sensor electrical connector.
3. Remove the CMP sensor bolt.
4. Remove the CMP sensor.
5. Inspect the sensor O-ring for wear, cracks, or leakage if the sensor is not being replaced.
Installation Procedure