VUE FWD V6-3.5L (2008)
1. Install the temperature sensor to the evaporator case assembly.
2. Twist the temperature sensor one quarter turn to engage to the evaporator case assembly.
3. Install the temperature sensor connector to the temperature sensor.
4. If removed, install the communications interface module. Refer to Communication Interface Module Replacement (See: Accessories and Optional
Equipment/Cellular Phone/Communications Control Module/Service and Repair/Communication Interface Module Replacement) .
5. Install the driver knee bolster panel. Refer to Driver Knee Bolster Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair) .