VUE FWD V6-3.5L (2008)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor Replacement - Bank 1 Sensor 1
Heated Oxygen Sensor Replacement - Bank 1 Sensor 1
Tools Required
J 39194-B Heated Oxygen Sensor Wrench
Removal Procedure
Notice: Refer to Heated Oxygen Sensor Resistance Learn Reset Notice (See: Service Precautions/Heated Oxygen Sensor Resistance Learn Reset
Notice) .
1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement) .
2. Remove the connector position assurance (CPA) retainer.
3. Disconnect the engine wiring harness electrical connector (3) from the heated oxygen sensor (HO2S) electrical connector (2).
4. Remove the HO2S electrical connector rosebud clip from the engine wiring harness retaining strap (6).