VUE FWD V6-3.5L (2008)
5. Install the battery negative cable ground to the body ground stud and install the battery negative cable ground nut (1).
Tighten the nut to 10 N.m (89 lb in).
6. Install the battery negative and positive cables to the battery and install the battery positive and negative cable nuts (2,3).
Tighten the nuts to 5 N.m (45 lb in).
7. Align and install the battery cover (1) until the battery cover retaining tabs (2) lock into place.
8. Position the ECM bracket in place. Refer to Engine Control Module Replacement (LE5 2.4L) (See: Powertrain Management/Computers and
Control Systems/Engine Control Module/Service and Repair) .
9. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement) .
