VUE FWD V6-3.5L (2008)
13. Ensure that the yellow identification band on the tube is hidden within the quick connect fitting.
14. A hidden yellow identification band indicates proper joint seating.
15. Fill the transmission to the proper level with DEXRON(R) VI transmission fluid. Refer to Transmission Fluid Check (See: Testing and
Inspection/Component Tests and General Diagnostics/4T45-E - Automatic Transaxle/Transmission Fluid Check) .
Automatic Transmission Oil Cooler Pipes Replacement
Automatic Transmission Oil Cooler Pipes Replacement
Use only double-wrapped and use only brazed steel pipe meeting the GM specification 123M or equivalent if replacement of the transaxle oil cooler
pipes are required. Ensure the pipe is double-flared.
Removal Procedure
Notice: Allow sufficient clearance around the transaxle oil cooler pipes and around the hoses to prevent damage or wear which may cause fluid
loss.
1. Remove the battery box. Refer to Battery Tray Replacement (2.4L LAT-2.4L) () .
2. Remove the upper transaxle oil cooler pipe fitting at the radiator.