VUE FWD V6-3.5L (2008)
Important: Prior to installing the seal, inspect the J 44385 for nicks or burrs that may damage the seal lip.
3. Using the J 44385 and the J 8092 , install the axle seal. Ensure the seal is lined up with the bore during installation.
4. Install the wheel driveshaft. Refer to Front Wheel Drive Shaft Replacement (See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service
and Repair/Front Wheel Drive Shaft Replacement) .
5. Check the transmission fluid level. Refer to Transmission Fluid Check (See: Service and Repair/Transmission Fluid Check) .
6. Install the wheel and tire. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair) .
7. Lower the vehicle.