VUE FWD V6-3.6L Hybrid (2009)
Keyless Entry Module: Service and Repair
Remote Control Door Lock Receiver Replacement
Removal Procedure
Warning: Refer to Battery Disconnect Warning (See: Starting and Charging/Battery/Service Precautions).
1. Disconnect the negative battery cable.
2. Remove the driver knee bolster. Refer to Driver Knee Bolster Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair).
3. Remove the remote control door lock receiver.
4. Disconnect the electrical connector.
Perform the SPO reprogramming when RFA receiver is replaced.
Installation Procedure