VUE FWD V6-3.6L Hybrid (2009)
Battery Current Sensor: Service and Repair
Battery Current Sensor Replacement
Battery Current Sensor Replacement
Removal Procedure
1. Remove the battery positive and negative cable. Refer to Battery Positive and Negative Cable Replacement (LZ4) (See: Battery/Battery
Cable/Positive/Service and Repair)Battery Positive and Negative Cable Replacement (LY7) (See: Battery/Battery Cable/Positive/Service and
Repair)Battery Positive and Negative Cable Replacement (LE5) (See: Battery/Battery Cable/Positive/Service and Repair).
2. Mark the location of the battery current sensor on the battery positive and negative cable with tape for reference during installation.
3. Remove the tape securing the battery current sensor to the battery positive and negative cable.
4. Mark the location of the battery positive and negative cable clips and remove the clips from the cable.
5. Squeeze the battery positive and negative cable branches together.
Important: Note the orientation of the battery current sensor prior to removal.
6. Slide the battery current sensor (1) off of the battery positive and negative cable.
Installation Procedure