scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

Antenna Amplifier|Service and Repair|Page 5166 > < Antenna Amplifier|Service and Repair
Page 2
background image

7. REMOVE REAR FLOOR BOARD NO.1
8. REMOVE REAR SEAT CUSHION ASSEMBLY
9. REMOVE REAR SEATBACK ASSEMBLY RH

10. REMOVE FRONT DOOR SCUFF PLATE RH
11. REMOVE LUGGAGE COMPARTMENT TRIM HOOK NO.1
12. REMOVE SIDE NO.1 TRIM ASSEMBLY RH
13. REMOVE LUGGAGE COMPARTMENT TRIM HOOK NO.2
14. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH
15. REMOVE ROOF ANTENNA POLE SUB-ASSEMBLY

16. REMOVE ANTENNA NUT

a. Using a snap ring pliers, remove the antenna nut as shown in the illustration.

Tool Part Number:
Snap Ring Pliers: 09905-00013
Claw: 09904-00060

HINT:  Wrap the tip of the snap ring pliers with protective tape to prevent damage to the parts.

17. REMOVE ANTENNA ORNAMENT

a. Remove the antenna ornament.

18. REMOVE AMPLIFIER ANTENNA ASSEMBLY

a. Disconnect the connector.
b. Remove the nut.

Antenna Amplifier|Service and Repair|Page 5166 > < Antenna Amplifier|Service and Repair