tC L4-2.4L (2AZ-FE) (2005)
Fuel Door Release Cable: Service and Repair
FUEL LID LOCK CONTROL CABLE SUB-ASSY
REPLACEMENT
HINT:
-
The installation procedures are the removal procedures in reverse order.
-
A bolt without a torque specification is shown in the standard bolt chart.
1. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSY
a. Remove the screw.
b. Remove the cover in the direction indicated by the arrow mark in the illustration.
c. Remove the cable.
2. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSY
a. Remove the front seat LH.
b. Remove the rear seat LH.
c. Remove the scuff plate LH.
d. Remove the seat belt floor anchor side LH.
e. Remove the side trim board.
f.
Remove the floor mat.
HINT: It is not necessary to fully remove the floor mat. Partially remove it so that the cable can be removed in step (g).