tC L4-2.4L (2AZ-FE) (2005)
4. Remove the back door outside garnish sub-assembly.
A. Remove the 4 nuts.
B. Detach the clip and disconnect the connector. Then remove the garnish.
5. Remove the 2 screws and the opener switch.
6. Install the 2 screws and the opener switch in the NEW back door garnish sub-assembly (P/N 76801-21070).
7. Install the back door outside garnish sub-assembly
A. Install the back door outside garnish sub-assembly.
B. Install the 4 new nuts (P/N 90080-17189).
8. Reassemble vehicle in reverse order of disassembly steps 1 - 5.