tC L4-2.4L (2AZ-FE) (2005)
/Page-1126002.png)
Required Tools & Equipment
Repair Procedure
1. Using a plastic pry tool detach the 8 claws and remove the back door garnish center.
2. Using a plastic pry tool detach the 7 claws and remove the left and right hand side back door garnish.
3. Remove the back door trim board assembly.
A. Remove the 2 screws.
B. Using a plastic pry tool detach the two upper clips.
C. Using a plastic pry tool remove the 9 lower clips and remove the back door trim board assembly.
