tC L4-2.4L (2AZ-FE) (2005)
9.
Remove the room light switch by removing the 2 bolts, 1 nut, and bracket from the drive gear.
10.
Remove the sliding roof drive gear assembly.
11.
Remove the drive cable and drive cable guide casing by removing the 12 nuts.
NOTE:
Be careful NOT to twist or damage the drive cable and guide casing during removal.
12.
Remove the sliding roof drive cable.
A.
Using the T25 Torx driver, remove the 2 Torx screws.
B.
Remove the 2 Phillips-head screws.
C.
Disconnect the drive cable from the lift guide.
D.
Slide the drive cable toward the rear of the vehicle and remove it.
NOTE:
When removing the drive cable, be careful NOT to damage the side airbag, wire harness, and other nearby parts.
13.
Remove the sliding roof cable guide casing.