tC L4-2.4L (2AZ-FE) (2005)
1.
Remove the back door stay sub-assembly. Using a screwdriver, remove the 2 stop rings and stay.
HINT:
Remove the door stay while supporting the back door with your hands.
2.
Install the back door stay sub-assembly. Install the stay with the 2 stop rings.
3.
Dispose of the previous back door stay sub-assembly.
A.
Horizontally fix the stay in a vise with the piston-rod pulled out.
B.
Wearing safety glasses, gradually cut between A and B as shown in the illustration using a metal saw to gradually release the gas.
Dimensions: A = 80 mm (3.15 in.) B = 20 mm (0.80 in.)