scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

Headliner|Specifications|Page 5490 > < Headliner|Specifications|Page 5488
Page 6
background image

a. Remove the clip A.
b. Using a clip remover, disengage the 2 clips labeled B and remove the trim.

17. REMOVE COWL SIDE TRIM SUB-ASSY RH

HINT:  Use the same procedures described for the LH side.

18. REMOVE REAR SEAT ASSY
19. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
20. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
21. REMOVE SIDE NO.1 TRIM ASSY LH

a. Remove the 2 floor anchor bolts (front and rear seat belt).
b. Using a clip remover, remove the clip A.
c. Using a screwdriver, disengage the claw labeled A and remove the hook of the trim by turning it to counterclockwise.

HINT:  Tape the screwdriver tip before use.

d. Using a clip remover, disengage the 8 clips.
e. Disengage the 3 claws and remove the trim.

22. REMOVE SIDE NO.1 TRIM ASSY RH

HINT:  Use the same procedures described for the LH side

23. REMOVE CENTER PILLAR GARNISH LH

Headliner|Specifications|Page 5490 > < Headliner|Specifications|Page 5488