tC L4-2.4L (2AZ-FE) (2005)
HINT: Use the same procedures described for the LH side
31. REMOVE FRONT PILLAR GARNISH LH
a. Using a clip remover, disengage the 2 clips and remove the garnish.
b. w/ Curtain shield airbag:
1. Using a clip remover, disengage the clip labeled A.
2. Using a screwdriver, firmly push the pin to disengage the clip B.
HINT:
-
The clip B cannot be reused.
-
Tape the screwdriver tip before use.
c. w/ Curtain shield airbag:
Protect the curtain shield airbag LH.