tC L4-2.4L (2AZ-FE) (2005)
^
Warranty application is limited to correction of a problem based upon a customer's specific complaint.
Required Tools & Equipment
Repair Procedure
1.
Disconnect the negative (-) battery terminal.
CAUTION
Wait at LEAST 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat pretensioner
activation.
2.
Remove the map light assembly.
A.
Using a clip remover detach the 3 clips and remove the light.
B.
Disconnect the map light connector.
3.
Remove the 2 bolts nut and bracket from the drive gear.