tC L4-2.4L (2AZ-FE) (2005)
1. REMOVE THE WIND DEFLECTOR ASSEMBLY
(a) Fully open the moonroof.
(b) Remove the 2 Torx bolts, one from each of the wind deflector support brackets.
(c) Remove the 4 Torx bolts from the two wind deflector hinge points.
(d) Remove the wind deflector.
(e) Lay the wind deflector with the top side facing down on a padded work surface as shown in the illustrations. This will cushion, support, and
protect the wind deflector from being damaged.