tC L4-2.4L (2AZ-FE) (2005)
10. REMOVE PARKING BRAKE SHOE LEVER LH
a. Using needle-nose pliers, disconnect the parking brake cable assembly No.3 and remove the parking brake shoe lever LH.
11. APPLY HIGH TEMPERATURE GREASE
a. Apply high temperature grease to the shoe attaching surface of the backing plate.
12. INSTALL PARKING BRAKE SHOE LEVER LH
a. Using needle-nose pliers, connect the parking brake cable assembly No.3 to the parking brake shoe lever LH.
13. INSTALL PARKING BRAKE SHOE ASSEMBLY LH NO.2
a. Apply high temperature grease to the contact part of the parking brake shoe and parking brake shoe lever.
b. Using SST, install the parking brake shoe LH No.2 with the parking brake shoe holddown compression spring and parking brake shoe
holddown spring pin.