scion Workshop Repair Guides

Scion tC L4-24L (2AZ-FE) Workshop Service and Repair Manuals

Vacuum Brake Booster|Testing and Inspection|Page 3386 > < Vacuum Brake Booster|Testing and Inspection|Page 3384
Page 2
background image

9. REMOVE COWL WATER EXTRACT HOSE NO.1 

10. REMOVE COWL BODY MOUNTING BRACKET LOWER LH 
11. REMOVE AIR CLEANER CAP SUB-ASSEMBLY
12. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY 

SST 09023-00101

13. SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS
14. REMOVE FRONT WHEEL LH

15. REMOVE FRONT BRAKE TUBE NO.5

a. Using SST, disconnect the front brake tube No.5 and remove it.

SST 09023-00101

16. SEPARATE BRAKE TUBE

a. Separate the 3 brake tubes from the clamps shown in the illustration.
b. Remove the clamp from the brake tubes.

17. REMOVE BRAKE BOOSTER ASSEMBLY

a. Loosen the clevis lock nut and remove the push rod clevis from the brake booster assembly.
b. Slide the clip, disconnect the vacuum hose from the brake booster assembly.
c. Remove the 4 nuts and brake booster assembly.
d. Remove the check valve assembly and grommet from the brake booster assembly.

18. REMOVE BRAKE BOOSTER GASKET
19. INSTALL BRAKE BOOSTER GASKET

a. Install a new brake booster gasket to the brake booster assembly.

Vacuum Brake Booster|Testing and Inspection|Page 3386 > < Vacuum Brake Booster|Testing and Inspection|Page 3384