tC L4-2.4L (2AZ-FE) (2005)
1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE FRONT WHEEL RH
3. REMOVE ENGINE UNDER COVER RH
4. REMOVE ENGINE UNDER COVER LH
5. REMOVE FRONT FENDER APRON SEAL RH
6. REMOVE ENGINE COVER SUB-ASSEMBLY NO.1
7. REMOVE FAN AND GENERATOR V-BELT
SST 09249-63010
8. SEPARATE VANE PUMP ASSEMBLY
SST 09249-63010
9. REMOVE ENGINE MOUNTING INSULATOR RH
10. REMOVE IGNITION COIL ASSEMBLY
11. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY
12. SET NO. 1 CYLINDER TO TDC/COMPRESSION
13. REMOVE NO.2 CAMSHAFT
a. Place paint marks on the chain and camshaft timing gears.
b. Remove the bolt.
c. Disconnect the wire harness protector clamp.
d. Remove the 2 nuts, chain tensioner and gasket.
NOTICE: Do not turn the crankshaft without the chain tensioner.