tC L4-2.4L (2AZ-FE) (2005)
/Page-332005.png)
1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE HOOD SUB-ASSEMBLY
3. REMOVE FRONT WHEEL RH
4. REMOVE ENGINE UNDER COVER RH
5. REMOVE ENGINE UNDER COVER LH
6. REMOVE FRONT FENDER APRON SEAL RH
7. REMOVE ENGINE COVER SUB-ASSEMBLY NO.1
a. Remove the 2 nuts, then remove the engine cover No. 1.
8. DRAIN ENGINE OIL
9. REMOVE EXHAUST PIPE ASSEMBLY FRONT
10. REMOVE FAN AND GENERATOR V-BELT
SST 09249-63010
11. REMOVE GENERATOR ASSEMBLY
12. SEPARATE VANE PUMP ASSEMBLY
SST 09249-63010
13. REMOVE ENGINE MOUNTING INSULATOR RH
a. Remove the bolt and radiator reserve tank.
b. Separate the vane pump oil reservoir from the oil reservoir bracket No. 1.
NOTICE: Do not disconnect the 2 hoses.
