tC L4-2.4L (2AZ-FE) (2005)
/Page-332013.png)
f.
Insert the damper spring into the adjusting hole, then install the chain tensioner plate with the bolt.
Torque: 12 Nm (122 kgf-cm, 9 ft. lbs.)
g. Align the adjusting hole of the oil pump drive shaft gear with the groove of the oil pump.
h. Insert a 4 mm diameter bar into the adjusting hole of the oil pump drive shaft gear to lock in position, then tighten the nut.
Torque: 29.5 Nm (301 kgf-cm, 22 ft. lbs.)
i.
Turn the crankshaft clockwise by 90° to position the crankshaft key upward.
32. INSTALL CRANKSHAFT TIMING GEAR OR SPROCKET
33. INSTALL CHAIN VIBRATION DAMPER NO.1
a. Install the chain vibration damper with the 2 bolts.
Torque: 9.0 Nm (92 kgf-cm, 80 inch lbs.)
