tC L4-2.4L (2AZ-FE) (2005)
d. Using a micrometer, measure the thickness of the removed valve lifters.
e. Calculate the thickness of a new lifter so that the valve clearance comes within the specified values.
Valve clearance:
Intake A = B + (C - 0.24 mm (0.0095 inch))
Exhaust A = B + (C - 0.35 mm (0.0138 inch))
HINT:
-
Select a new lifter with a thickness as close to the calculated values as possible.
-
Lifters are available in 35 sizes in increments of 0.020 mm (0.0008 inch), from 5.060 mm (0.1992 inch) to 5.740 mm (0.2260 inch).
-
Refer to New Lifter Thickness table on the next 2 pages.