tC L4-2.4L (2AZ-FE) (2005)
3. REMOVE FLOOR PANEL BRACE FRONT
a. Remove the 4 bolts, then remove the floor panel brace front.
4. REMOVE EXHAUST PIPE ASSEMBLY TAIL
a. Remove the 2 bolts and 2 compression springs.
b. Remove the exhaust pipe tail from the 3 exhaust pipe supports No. 4.
c. Remove the gasket from the exhaust pipe center.
5. REMOVE EXHAUST PIPE ASSEMBLY CENTER
a. Remove the 2 bolts.
b. Remove the exhaust pipe center from the 2 exhaust pipe supports No. 4.