tC L4-2.4L (2AZ-FE) (2005)
a. Install the radiator support upper with the 5 bolts and 2 nuts.
Torque: 9.8 N.m (100 kgf.cm, 87 in.lbf) (Nut)
12. INSTALL HIGH PITCHED HORN ASSEMBLY
13. INSTALL LOW PITCHED HORN ASSEMBLY
14. INSTALL HOOD LOCK ASSEMBLY
a. Install the hood lock assembly with the 3 bolts.
15. INSTALL RADIATOR SUPPORT UPPER
a. Install the 2 radiator support upper with the 2 bolts.
Torque: 19 N.m (194 kgf.cm, 14 ft.lbf)
16. INSTALL COOLER REFRIGERANT LIQUID PIPE A
a. Remove the attached vinyl tape from the pipe and the connecting part of the cooler condenser assembly.
b. Sufficiently apply compressor oil to a new O-ring and the fitting surface of the pipe joint.
Compressor oil: ND-OIL 8 or equivalent
c. Install the O-ring on the cooler refrigerant liquid pipe A.