tC L4-2.4L (2AZ-FE) (2005)
/Page-967002.png)
3. REMOVE HEATER CONTROL & ACCESSORY ASSEMBLY
a. Disengage the 9 claws.
NOTE: If the heater control & accessory assembly is removed with the cover open, it may be broken. Be sure the cover is closed when
removing.
b. Disconnect the connector, then remove the heater control & accessory assembly.
4. REMOVE CENTER CLUSTER MODULE KNOB
a. Remove the center cluster module knob.
5. REMOVE HEATER CONTROL BASE LOWER
a. Remove the 6 screws.
b. Release the 2 claws and remove the air-conditioner panel sub-assembly.
