scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

Evaporator Case|Service and Repair|Page 4542 > < Evaporator Case|Service and Repair|Page 4540
Page 4
background image

a. Using pliers, grip the claws of the clip and slide the clip.
b. Disconnect the heater water inlet hose A.

5. DISCONNECT HEATER WATER OUTLET HOSE A (FROM HEATER UNIT)

HINT:  Disconnection of the heater water outlet hose A is the same as for the heater water inlet hose A.

6. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY UPPER W/FRONT PASSENGER AIRBAG ASSEMBLY 

HINT:  Refer to the instructions for removal of the instrument panel sub-assembly upper w/ front passenger airbag assembly.

7. REMOVE INSTRUMENT PANEL LOWER ASSEMBLY

HINT:  Refer to the instructions for removal of the instrument panel lower assembly.

8. REMOVE ECM

9. REMOVE HEATER TO REGISTER DUCT NO.3

a. Remove the 2 clips.
b. Release the 2 claws and remove the heater to register duct No.3.

10. REMOVE DEFROSTER NOZZLE ASSEMBLY LOWER

a. Release the 2 claws and remove the defroster nozzle assembly lower.

11. REMOVE INSTRUMENT PANEL TO COWL BRACE CENTER

Evaporator Case|Service and Repair|Page 4542 > < Evaporator Case|Service and Repair|Page 4540