tC L4-2.4L (2AZ-FE) (2005)
a. Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the cooler evaporator sub-assembly No.1.
Compressor oil: ND-OIL 8 or equivalent
b. Install the 2 O-rings on the cooler evaporator sub-assembly No.1.
28. INSTALL EVAPORATOR TEMPERATURE SENSOR
a. Install the evaporator temperature sensor as shown in the illustration.
b. Install the cooler evaporator sub-assembly No.1 on the heater case with the 7 screws.